Product Detail | Crystal Paint



Wall Putyy



Crystal Wall Putty is a hight quality water based filler for patching cracks, leveling uneven rough porous cement walls, plaster work and filling defective surfaces, it provides a perfect smooth finish which enhances the performance of top coat. it has excellent workabillity, drying and sanding properties.


All the surfaces must be thoroughly dry before putty application, Remove dust, grease, oil and other foreign matters from new masonry surface. Use a bleach solution to treat the surface affected by fungus. Make the surface smooth before application of Crystal Wall Putty using sandstone or a coarse sanding paper, Dust off properly


Drying Time             :Touch Dry: 15 minutes.
                                (Dependent on temperature and humidity)
                                Hard Dry:45-60 minutes.
Recoating Interval  :2-3 hours.

Theoretical Coverage :4 - 6m2/ Kg/ coat.
(Many vary depending on the substrate conditions)

Refer to Technical Data Sheet for application and thining procesture.



.Stir well before use..Application can be done by putty applicator or trower
.Spread Wall putty to get a smooth finish. Remove any dried putty from the applicator to achieve best performance.
.Clean up all equipment with water immediately after use


.Keep out of the reach of children and away from food and drink, Do not
 swallow the paint. If swallowed, seek medical advice immediately.
.Ensure good ventilation during application and drying.
.Do not breathe in vapor or sanding dust. Avoid contact with eyes and skin
 When applying paint, it is advisable to wear eye protection. In case of 
 Contact with eyes, rinse immediately with plently of water and seek medical
.Wear protective clothing and mask white applying paint. Use soop and
 water to clean the splashes from skin.
.Putty must always be stored in a cool and dry place.
.Care must be taken during transportation. Always keep container in a 
 secure upright position.
.Use sand to contain any spillage. Dispose off paint in accordance with the 
 appropriate environmental Quality Regulation.
.Do not discharge into drains or envirnment.
.Does not contain any added Lead, Mercury, Chromium and Codmium
.Chemical Safety Data Sheet available on request.